Description
Job Description
Ensure optimized equipment performance for all field instruments (Sensors, Transmitters, Flowmeter, Control Valves, etc.) Motors and Drives by maintaining and improving equipment, line electrical & automation controls.
Drive innovation and improvement.
Manage people and resources to ensure uncompromised safety, availability and quality and minimizing the impact of the activities on the environment.
Upskilling, training and development of electrical, Instrumentation and automation technicians.
Coordinate and ensure, when important, successful implementation of process optimization (modifications) projects becomes.
Qualifications
B.sc or HND Electrical/ Electronics
3-5 years working experience in the field of Electrical & Automation Industries, Versatile with PLC systems (Siemen, Allen Bradley) VSD and VFD
Good knowledge of circuit troubleshooting via electrical diagrams, ladder Diagrams, pneumatic diagrams etc.
Ability to solve practical problems and deal with situations where limited standardization exists
Strong electrical design and debugging skills
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to formulate and document a high level plan with input from many functional groups.
Experience with embedded controllers, I/O handling systems and PLC's
Ability to troubleshoot equipment problems and perform complex system tests
Good hands on experience in Siemens and Allen Bradley PLCs programming and surfing.
Good knowledge in SCADA and HMI units.
Records maintenance skill
Ability to plan, develop and coordinate multiple projects.
Leadership skill
Apt in field instruments calibration.
go to method of application »
Job Description
Sampling, Analysis and Testing of all Incoming materials against specifications.
To ensure conformance of all incoming materials against approved specifications.
To ensure incoming materials are being tested according to approved specifications and operating procedures.
Reports deviations to departmental head and takes necessary action
Maintains necessary records and all documentations of all incoming materials
Qualifications
Minimum of Bachelor’s Degree in Chemistry
Minimum of 2 – 3 years in Edible Oil Industry as a Raw Material Analyst.
Required to have full testing knowledge in Soya bean seed and Soya bean oil
go to method of application »
Job Description
Oversee and manage the full production process of a manufacturing plant.
Monitor equipment to ensure the quality, efficiency and safety of the product and plant.
Responsible for the safe operation, basic maintenance, and troubleshooting of the facility’s equipment’s and instruments.
Program and operate the facility’s computer system that operates the machinery.
Conduct continuous inspections of all key process points in the facility to identify anything abnormal
Ensure that the products being produced under their supervision meet all specification
Maintain detailed reports of operations
Qualifications
OND,HND or any related Engineering degree
3-5 Years Work Experience in similar industry.
Ability to work a flexible schedule, including nights and weekends.
go to method of application »
Job Description
The role is responsible to provide leadership and technical expertise for the efficient operation, monitoring, assessment of site utilities and mechanical systems.
Develop unit capabilities to achieve maximum utilization of technology and equipment
Perform condition-based maintenance on all utility equipment using CMMs
Ability to pass the technical proficiency test, and shows a high level of hands on skills;
Handle responsibilities of monitoring tools, equipment and spare parts inventory
Responsible for ensuring use of spare parts in most effective and productive manner
Ensure conformance to power network layout and trouble shooting.
Apply EHS procedures and good practices in order to prevent personal injuries and damage to equipment;
Ensure a prompt end of shift report of all Technical issues preventing the machines in his domain from achieving optimum performance;
Decision making and problem-solving capabilities.
Strictly adhere and conform to all QMS standard
go to method of application »
Job Description
Organize routine servicing schedules and carry out quality inspections
Check and calibrate instruments to make sure they are accurate
Respond immediately to equipment breakdowns
Fix faults and arrange for replacements to be installed
Organize teams to make sure 24-hour cover is available
Monitor specialized equipment’s like Extractor, DT, Flaker, Expander, m/seal pumps, Centrifuge etc.
Plan and undertake scheduled maintenance
Diagnose faults and repair equipment's
Handle maintenance of major specialized equipment's
Obtain specialist components, fixtures or fitting
Ensure compliance with health and safety legislation
Strictly adhere and conform to all QMS standard
Qualifications
B.sc or HND in Mechanical Engineering.
3-5 years working experience in the field of Manufacturing, and process companies (SEP, Prep, Refinery)
Strong mechanical repair/troubleshooting and metal working skills.
Proficiency in Machine Repair, Machine Tool Operations, Pipefitting and Welding.
Functional knowledge of mechanical components (valves, pipe fittings, bearings, motors, gearboxes, etc.)
Ability to read and/or interpret mechanical, pneumatic and hydraulic blueprints or schematics.
Excellent interpersonal skills and ability to communicate with all levels of the organization both written and verbal
Be able to perform basic reading and arithmetic problems involving addition, subtraction, multiplication, and division. Be willing and able to learn shop math, including simple geometry.
Computer proficiency in Microsoft Word, Excel, job related internet research and ability to learn e-maintenance software for daily usage.
go to method of application »
Job Description
Support system engineering operations by designing, planning, developing, scheduling, installing and analyzing the company's instrumentation and electrical systems
Make decision and resolve issues, work as a business unit leader, develop constructive relationships with Heads of the department, external vendors and contractors
Review the implementation of measuring devices or new control systems, ensuring each part is installed properly and conduct test runs before initiating actual operations.
Supervise the maintenance, installation, calibration, and repair of a variety of electronic instrumentation, metering devices, electrical equipment, process control computers and peripheral equipment.
Demonstrate integrity, and commitment to innovation, efficiency, and fiscally responsible activity.
Assist in the preparation of preliminary and long-range plans, cost estimates and budgets.
Complete the more difficult installation, calibration and repair jobs.
Qualifications
Bachelor or HND Degree in Electrical, Mechanical, Physics, Computer Engineering
A work experience of at least 5 years.
Good communication and interpersonal skills.
Broad knowledge of principles and practices allied with technical disciplines.
Excellent communication skills along with the ability to translate project requirements into the design and then develop it into hardware as per the demand of the task.
go to method of application »
Job Description
Maintain file & document in a coordinated system (EXCEL & ACCESS) & manual file etc.
Document Preparation for all seeds on SAP
Maintain housekeeping & safety in warehouse.
Dispatch Report Preparation
Coordinate with logistics department
Prepare team Members for SOP procedure.
Manpower Allocation of seed receipt and Warehouse.
Maintain housekeeping & safety in seed Receipt Area and WH.
Follow SOP for Fumigation and Pest control.
Handle supply chain related issues for inbound materials to warehouse, outlets and stores.
Document preparation & handling of standard operating process (SOP) on food quality
Daily and monthly MIS Report preparation.
Qualifications
8-10 years work experience in Warehouse Management
Have good knowledge of operations and preparing MIS reports
Understand the GMP/GHK alongside adopting safety precautions and fumigation.
Skilled in handling both local and export sales under good housekeeping.
Have good knowledge in warehouse standard operating procedures.
Have good knowledge in Tank Farm standard operating procedures.
go to method of application »
Job Description
Tend machine that flattens and dries oilseed, such as soybean and presses it to extract oil: Turns handwheels to adjust distance between rollers that flatten oilseed.
Starts rollers and turns gate valve to admit oilseed.
Observes rolling process to ensure that pressure of rollers on oilseed is not sufficient to extract oil.
Turns control of heat drier to specified temperature, and opens chute to admit flattened oilseed to drier.
Turns steam valves of heat cooker to cook dried oilseed.
Turns handwheels to adjust roller pressure of oil expeller.
Feels samples of expelled oilseed to determine that sufficient quantity of oil has been removed.
Tend attrition mill that breaks up dehydrated oilseed.
May be designated according to process phase as Crusher Tender; Drier Tender II; Oil-Expeller
Qualifications
ND or HND in any Engineering field
Minimum of 3-5 Years work experience as an Oil Mill operator
go to method of application »
Job Description
The role is responsible for fabrication and machine all required parts
To fabricate or reproduce spare parts for the machines.
Assist the fitter mechanics in the maintenance and repairs of machines
To ensure that all working machine parts are in good working condition.
To ensure that the workshop is properly cleaned at all time.
Responsible for ensuring use of spare parts in most effective and productive manner
Performing any other related duties as assigned from time to time
Shall understand and practice company HSE requirements
Strictly adhere and conform to all QMS standard
Qualifications
Minimum of OND or FSLC in General Educational Development (GED)
Minimum of 3 yrs of experience in the operation of workshop machines like lathe, milling, drilling, grinding etc.
Ability to understand safety & environmental risks associated with working of plant.
High-level communication and interpersonal skills
Ability to be flexible and open to changing priorities and challenges.
go to method of application »
Job Description
This position will support operations by maintaining, troubleshooting, repairing and optimizing manufacturing equipment including but not limited to fitting, plumbing, welding, heating/cooling, automation and fire protection systems in a safe and orderly fashion as directed by the Chief Engineer at prep section. This position creates value for the factory by performing preventative and corrective maintenance leading to increased uptime and reliability, thus helping the facility to meet their production and quality goals.
Identify, troubleshoot and repair mechanical, hydraulic and pneumatic problems on plant facilities and production equipment.
Performs preventative maintenance per defined interval/schedule in a timely manner,
Recognizes and corrects potential equipment failure or unsafe conditions and communicates this to Maintenance Manager.
Performs pipe fitting of both threaded and welded pipe of various sizes,
Ensures that all work performed meets required codes and is in accordance with plant policies and procedures.
Utilizes appropriate Personal Protective Equipment (PPE) including, but not limited to, safety glasses, face shields, hearing protection, safety shoes, gloves and aprons.
Responsible for proper care/cleaning of tools, parts, materials and work area.
Responsible for providing coverage in the absence of other Maintenance Technicians.
Other duties as assigned by management.
Be able and willing to work in non-ideal environments such as: confined spaces, working at heights, dusty/dirty and around chemicals.
Strictly adhere and conform to all QMS standard
Qualifications
5-7 years of experience in an Industrial Maintenance environment.
Technical/vocational training
HND, ND or its equivalent in Mechanical Engineering
Strong mechanical repair/troubleshooting and metal working skills.
Proficiency in Machine Repair, Machine Tool Operations, Pipefitting and Welding.
Functional knowledge of mechanical components (elevators, conveyors, flaker rollers, destoner, seed cleaner, expander, valves, pipe fittings, bearings, motors, gearboxes, etc.).
Ability to work both independently and in a team environment completing objectives efficiently with a sense of responsibility.
Related search
