Description
Reference: 2021-18827
Location:
Offshore, Nigeria
Contract Type: Permanent Contract
Contractual Hours: Full Time
Employee Status: Employee
Job Description
The main objectives for job holder are to:
Perform proper works coordination, activities reporting, equipment condition analysis, in view of maintaining and optimizing the operations and the equipment performance.
Participate in the preparation and reporting for Maintenance entity activities including issuance of dashboards and reports
Ensure the issuance and optimization of the Maintenance entity Plans and Practices in view of budget control, production optimization, and HSE best Performance.
Control and administer the technical and administrative documentation within the Maintenance entity including engineering and vendor technical documentation and ensure update of CMIMS, EDMS, and servers.
Responsible to ensure that the equipment registers are kept up-to-date and that maintenance records are validated at proper level, properly reported, recorded and maintained in the dedicated data bases.
Ensure that equipment availability and reliability are at their optimum.
Ensure consistency of the methods used by the various maintenance disciplines.
Responsible to initiate, control, and validate the studies aiming at equipment optimization.
Ensure that the specifications for repair, modifications, and materials comply with the relevant regulations, company rules, technical codes, standards and norms.
Profile
Education: B.Sc / BEng in Engineering.
Professional Certification: CITB STS, OHSAS 18001 or equivalent
Professional experience: 10 years in Oil & Gas environment
5 years’ experience in Safety Equipment Maintenance
Experience in maintenance support and especially in field maintenance capacity
Good knowledge of MS Office tools (excel and project)
Good knowledge of planning tools, and of CMIMS tools (preferably SAP based)
Skills required: Collaboration spirit, good presentation and communication
Languages:
English (E-Native or bilingual proficiency).
go to method of application »
Reference: 2021-19229
Location:
Onshore, Lagos
Contract Type: Temporary work contract
Contractual Hours: Full Time
Contract Duration: 6 Months
Employee Status: Operative
Job Description
Provides schedule impacts for changes.
Incorporates engineering and field schedules into the performance measurement baseline.
Provides earned value reporting and performance measurements.
Provides man-hour and manpower figures and trends for cost analysis, including delayed construction, procurement and/or engineering deliverables.
Formulates and recommends corrective action measures such as schedule
revisions, manpower adjustments and work requirements.
Contacts his counterparts for EPC, procurement, subcontractors and OEM vendors.
Highlights to project manager any unplanned event which might impact the Master planning.
Profile
Planning Coordinator with extensive experience as an Planning Coordinator
Experience in LNG project is required
Minimum Level of Experience required:
6 years or more.
Languages:
English (E-Native or bilingual proficiency).
go to method of application »
Reference: 2021-19243
Location:
Onshore, Lagos
Contract Type: Temporary Work Contract
Contractual Hours: Full Time
Contract Duration: 6 Months
Employee Status: Operative
Job Description
Manages and supervises commissioning activities performed by a team of technicians, in a safe and professional manner, within the framework and priorities defined by the Commissioning Manager.
Be the technical reference for all matters related to his trade and providing solutions to technical issues.
Supervises Commissioning Start Up, Operation and Maintenance of mechanical equipment and pipework activities, ensuring optimum system protection and safety of equipment and personnel.
Participates to Walk Through whenever a system is declared by Construction Agency as Mechanically Completed.
Leads PSSR (pre-start-up safety reviews) of systems incorporating major rotating equipment.
Witnesses pre-commissioning activities as demanded by the Project Scope.
Reviews and assesses commissioning procedures developed by others (Vendors, EPC’s).
Profile
Piping & Mechanical Engineer with extensive experience as an Piping & Mechanical Engineer
Experience in LNG project is required.
Minimum Level of Experience Required:
6 years or more.
Languages:
English (E-Native or bilingual proficiency).
go to method of application »
Reference: 2020-17670
Location:
ERHA FPSO, Nigeria
Contract Type: Permanent Contract
Contractual Hours: Full Time
Employee Status: Employee
Job Description
SPIE NIGERIA LMITED is looking for a PLC Technician to join the taskforce of an offshore project located in Nigeria
As PLC technician you will reports to and supports the ICSS Supervisor onboard.
Your responsibilities will include:
Responsible for troubleshooting, data & program back-ups, installing inhibitions (defeats) & removing inhibitions (defeats) where required due to planned or corrective maintenance activities and to ensure the continued operation of the DCS system and facility.
Assists ICSS supervisor with engineering updates & / or code correctives.
Provides assistance to operations and maintenance teams during troubleshooting through simulations, control loops and feedback.
Profile
Minimum 6 years experience in the maintenance field on offshore oil and gas installations
Higher National Diploma or higher qualification in Electrical / Instrumentation & Control Engineering
Experience in PLC, Allen Bradley, Siemens, ladder logic systems etc. plus related communication interfaces, protocols and Human Machine Interfaces (HMI) - and all Machine Monitoring Systems (Bentley Nevada) including GE System 1.
Documented training in Instrumentation & Controls.
Required Authorisations:
DCS - Foxboro
PLC - Allen Bradley; Siemens.
Languages:
English (D-Full professional proficiency).
go to method of application »
Location:
Port Harcourt, Rivers
Employment Type: Fixed - Term - Contract
Job Description
Software Maintenance:
Provide availability for installations, Analyse and diagnose possible communication problems
Execute the control modifications and / or corrective actions for :
Alarm labels, wrong animations etc
Logic change on special working points
Data maintenance and updating available for P.I
Scale and threshold check, possible corrective actions
Transfer these modifications on offshore sites and update them
Analyse and diagnose possible automation working problems
Execute program modifications required by TEPNG
Realize controller and automaton programs backups
Keep up to date DCS documents and diagram
Material Maintenance:
Diagnose malfunctions and execute the material maintenance
Execute preventive maintenance works
PC disk and memory free space check
Package and system fault logs check
PC mouse and keyboard check
Ventilation filters and PC / Server de-dusting
PLCs batteries follow-up, possible changes
Organization:
Take instruction from the maintenance superintendent of TEPNG
Use the CMMS (SAP) software as his main organisation tool
Manage system follow up
Update the Assistance sheets requests
Print activity report
Involvement in construction works in accordance with maintenance superintendent
Provide an assistance to the operators
give precise details about pump start-up or valve port conditions
help for diagnosis
Explain DCS functionalities (test report printing, threshold modification, alarm inhibit, etc.)
Collect operators « feedback » for possible system improvements
Assist mainly instrument supervisor in their different maintenance tasks connected with the DCS (scale check, measures etc.)
Material Used on Site:
SIEMENS Simatic S5
Triconex
Les serveurs : CISCO 4000
Bently Nevada
Profile
Able to express himself in English recommended French
Reliability, with a significant experience to operate oil or gas field
Ability to work under pressure and stressing conditions
Position holder is located on COBO with 24-hrs duty on a 4 x 4 weeks rotation schedule
Needs to maintain good communication with other TEPNG departments, prod & method
Ensures safe, efficient and cost effective operations through proactive management Mtce Contractor
Achievement of required maintenance programs
Candidate Criteria
Minimum level of experience required:
6 years or more
Required Authorisations:
HUET
Electrical habilitation H0 L1v LR
Languages:
English (D-Full professional proficiency)
go to method of application »
Reference: 2021-19267
Location:
Port Harcourt, Rivers state
Contract: Fixed-term-contract:
Contractual hours: Full time
Contract duration: 1 rotation to permanent
Job Description
Specific professional knowledge: CMIMS : SAP/R3.
Mechanical Specific: Aero Derivative Gas Generators (Rolls Royce RB211 preferably), Compressors, Diesel Generators, etc.
Job Purpose
Be responsible/and to complete maintenance activities on power turbines by planning, organizing, and controlling projects; completing quality inspections; supervising sub-contractors and staff.
Reporting to the CSR, provide technical support, responsible of running and monitoring of 5 Rolls Royce turbo-generators and 3 Thermodyn turbo-compressors .
Duties
Your main duties will be to:
Responsible of running and monitoring of turbo-generators and turbo Compressors
In charge of L1 to L3 maintenance tasks preparation and performance
In charge of L4 to L5 site maintenance preparation of maintenance
Assistance to Rolls Royce and GE during major operations
Coordination with Rolls Royce site representative
Follow-up of spare parts , consumables, tools and procedures
Profile
At least 10 years oil and gas industry experience in a relevant maintenance role.
At least 5 years in a significant lead technician role with demonstrated skills to successfully implement maintenance best practices
Demonstrated safety leadership and personnel management skills.
Culturally aware and experience in working with multi-national workforces.
Candidate Criteria
Minimum level of experience required is 6 years or more
Required Authorisations:
HUET
Banksman
Elec habilitation H0v L0
Work at height
Languages:
English (D-Full professional proficiency)
Related search
